作业帮英语翻译本次毕业设计的题目为:某市40000m3/d生活污水处理厂设计.主要任务是工艺流程选择及构筑物设计和计算.该污水处理厂工程,总规模达到4万立方米/日.该污水厂的污水处理流程为：从泵
来源：学生作业帮助网 编辑：作业帮 时间：2024/04/29 01:27:09
英语翻译本次毕业设计的题目为:某市40000m3/d生活污水处理厂设计.主要任务是工艺流程选择及构筑物设计和计算.该污水处理厂工程,总规模达到4万立方米/日.该污水厂的污水处理流程为：从泵
英语翻译
本次毕业设计的题目为:某市40000m3/d生活污水处理厂设计.主要任务是工艺流程选择及构筑物设计和计算.
该污水处理厂工程,总规模达到4万立方米/日.该污水厂的污水处理流程为：从泵房到沉砂池,初沉池,进入氧化沟,二沉池,最后出水；污泥的流程为:从二沉池排出的剩余污泥首先进入浓缩池,进行污泥浓缩,然后进入贮泥池,经过浓缩的污泥再送至带式压滤机,进一步脱水后,运至垃圾填埋场.
其中初步设计要完成设计说明书一份、污水处理厂总平面布置图一张、高程图一张、流程图一张、主要设备图一张；单项处理构筑物施工图设计中,主要是完成氧化沟平面图和剖面图.
出水执行国家污水综合排放标准（GB8978-1996）二级标准.
关键词：氧化沟工艺；污水处理；污泥处理.
英语翻译本次毕业设计的题目为:某市40000m3/d生活污水处理厂设计.主要任务是工艺流程选择及构筑物设计和计算.该污水处理厂工程,总规模达到4万立方米/日.该污水厂的污水处理流程为：从泵
The graduation design topic for: 40000 m3 / d city life sewage treatment plant design. The main task is to process selection and structures in the design and calculation.
The sewage treatment plant engineering, the total scale to 40000 m3 / day. The wastewater treatment plant of wastewater treatment process for: from the pump room to sink sand pool, the pond, into the oxidation ditch, the second pond water, finally; The process of sludge from the second pond of eduction excess sludge first in a pool, sludge concentration, and then into the mud, after the sludge concentration pool and then sent to the belt type filter press, further after dehydration, shipped to the landfill.
One preliminary design to complete the design specification a sewage treatment plant, general layout, a figure a, flow charts a elevation, the main equipment figure a; Single processing structures in the design of construction, mainly is completed the oxidation ditch plan and section.
Execute the national comprehensive sewage water discharge standard (GB8978-1996) secondary standard.
Keywords: oxidation ditch process; Sewage treatment; The sludge treatment.